Philips DVD740VR Owner's Manual page 11

DVD740VR 4/12/02 12:08 PM
DVD/VCR to a TV that has Audio and Video In jacks
This connection will let you use the features of both the VCR and the DVD Player.
ANT-IN
ANT-OUT
CH3 CH4
Antenna or
1
Cable TV
Signal to
ANT-IN Jack
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV, matching the cable colors to
the jack colors. If the TV has a single AUDIO IN jack, use the white audio
cable to connect the DVD/VCR's white DVD/VCR AUDIO OUT jack to the
TV's AUDIO IN jack. You will not use the red cable.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.
For better DVD picture quality, connect an S-Video cable (not supplied) to the S-
VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV instead.
However, the S-Video connection only supplies video (picture) for the DVD Player of
the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at
the DVD/VCR, you still need to either connect the RF coaxial cable between the
ANT-OUT jack of the DVD/VCR and the TV's Antenna In jack, or connect the yellow
video cable as described earlier. To connect the supplied RF coaxial cable, see step 2
on page eight.
4
Connect the power cords of the TV and the DVD/VCR to a power
outlet. Turn on the TV and set it to the correct Audio/Video In
channel. If you are using the red/white/yellow audio/video cables for VCR or
DVD playback, choose the Audio/Video In channel at your TV. If you are using
the S-Video cable for DVD playback, choose the S-Video In channel at your
TV. If you are using the RF coaxial cable for VCR or DVD playback, choose
channel 3 or 4 at the TV. See your TV owner's manual for more details. Or,
simply continue changing channels at the TV until you see VCR or DVD play-
back on the TV screen.
5
You are ready to turn on the DVD/VCR. Go to page 15 before turn-
ing on the DVD/VCR.
Page 11
Using the supplied red, white, and yellow cables
DVD/VCR
IN OUT
DVD/VCR
L
AUDIO OUT
AUDIO
R
VIDEO
Hookups (cont'd) 11
COMPONENT
VIDEO OUT
Y
DIGITAL AUDIO OUT
S-VIDEO
PCM/MULTICHANNEL
L Cb OUT
COAXIAL
R Cr
3
Video Cable
2
Audio Cables
Audio and
Video IN Jacks
on TV