Recording One Channel/Watching Another - Philips DVD740VR Owner's Manual

DVD740VR 4/12/02 12:08 PM

32 Recording One Channel/Watching Another

VCR
Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1
Press VCR, then press REC/OTR to record the cur-
rent TV channel. Details are on page 31.
2
Press VCR/TV once to put the DVD/VCR in TV
position. The VCR/TV light will disappear from the front
of the DVD/VCR.
3
Use the TV remote control to select the channel
you want to watch at the TV.
4
To return to the channel being recorded, use the
TV remote control to select channel 03 or 04 at
the TV (the channel to which the CH3/CH4 switch on the
back of the DVD/VCR is set). Or, if you connected the
DVD/VCR to the TV using audio and video cables, select
the correct audio and video in channel at the TV. Details
are on page 11.
5
Press VCR/TV on the DVD/VCR remote control to
put the DVD/VCR in VCR position. The VCR/TV light
will appear on the front of the DVD/VCR. The channel
being recorded will appear on the TV screen.
6
Press STOP C (p) to stop the recording.
Page 32
POWER
MARKER
SETUP AUDIO SUBTITLE ANGLE
1
REC/OTR REPEAT REPEAT
A-B
CHANNEL/SKIP
CLEAR
TITLE MODE RETURN
OUTPUT SELECT
DVD VCR
DISC
MENU OK
6
STOP PLAY
REW FF
PAUSE
TIMER SET
1 2 3
VCR/TV
4 6
5
MEMORY
7 8 9
SPEED
+ 10 0
SEARCH MODE DISPLAY ZOOM SLOW
TIME SEARCH STATUS/EXIT
2,5
3
Select the channel you
want to watch at the TV.
4
Select channel 03
or 04 at the TV.
Helpful Hint
• If you use a Cable Box or Direct
Broadcast System hookup, you
may not be able to watch one
channel while recording another.
See pages 9-10 for details.