Installation; Site Preparation; Installation Procedure - Viking VCSO244 Installation Manual

Installation
Site Preparation
NOTE: It is recommended that a thorough
site nsaection be conducted PRIOR to
unoacl<ing and moving this aooliance,
DO NOT use rne nanole or aDDliance
doorro iftrne aDDliance. Remove door
before installation re ensure mar it is not
used ro ift rne unit. Do not lift or carry
the door by the handle.
* Refer to the Use & Care Manual for
property removing the door.
Confirm available access to adequate
power- see eJectrical requirements.
• It is recommended that 3/4" or larger
material be utilized to create a sLppor[
platform for this a ppliance.
o BE SURE that support for this appliance is
perpendicular to the front facing of the
wall or cabnet before you perform the
installation.
Installation Procedure
• All openings in the wall behind the oven
or in the floor under the oven shoud be
sealed.
, Keep oven area clear and free from
combustible materials, gasoline and other
flammable vapors.
DO NOT use an extension cord witk this
appliance. Such use may result ;* fire
electrica shock or orner oersona -jury.
Remove the }unc-ion box cover,
qser[ ove- into the caD_ne_ ooemng,
Strain
relief
Connect green wire from eve- _o me SUDDI] cable
9round wire inside the junction b )x. Connect black and
red wires from oven _o ma_cn n9 co_or w_res frorr supply
:able :- ] Jnctior DOX,
Push tk e )ven in and agalns_ _ne caolne_ until the lateral
nolc]ers of the oven touch the front of the cabiqet. Avoid
oinchin 9 me conoul_ between _ne oven and tne wall. Be sure
me oven Is placed at tne cen_er of the openln 9.
Feed tne flexible Cable conduit from the oven mroug eden tne _ven aoor ana at_acn me oven _o _ne front of eden _ne ovel door, Pass the trirr KP[over the aoor
Place the oven in front of the cabinet opening.
tne ooenm 9 -tne caDine_, the cabinet with 4 screws, towards the front of the cabinet
7 8