How To Wire Your Ceiling Fan - Emerson CF144BS00 Owner's Manual

5. How to Wire Your Ceiling Fan

5.8
After connections have been made, turn leads upward and
carefully push leads into the outlet box, with the white and
green leads on one side of the outlet box and the black
and blue leads on the other inside of the outlet box.
Remove one of the four screws in the ceiling mounting
plate and loosen the remaining three screws (Figure 16).
Unhook the fan motor housing from the ceiling mounting
plate hook and lift the fan motor housing assembly up to
the ceiling mounting plate.
Align and engage the motor assembly slots with the three
screw heads previously loosened by rotating the fan motor
housing assembly to engage the screw heads and all three
slots.
Install the previously removed M5 x 10mm screw and
secure the assembly to the plate (Figure 16). Completely
tighten all four screws.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling mounting plate and the
fan motor housing assembly.
5.9
Position the ceiling trim ring over each of the protruding
ceiling cover screw heads and rotate the ceiling trim ring
counter-clockwise to secure (Figure 17).
CEILING MOUNTING
PLATE
Figure 16
Figure 17
Please contact 1-800-654-3545 for further assistance
11
M5 x 10mm PAN HEAD
CEILING COVER
(Continued)
SCREWS
FAN MOTOR
HOUSING
ASSEMBLY
CEILING COVER SCREW
HEADS (4)
CEILING TRIM
RING
FAN MOTOR
HOUSING
ASSEMBLY
emersonfans.com
U.L. Model No.: CF144 & CF152