Ift-Rc400 User Guide - Outdoor Lifestyles ODFORTG-36 Owner's Manual

C. IFT-RC400 User Guide
IFT-RC400 IntelliFire™ Touch Remote Control
The Screen, Functions and Indicators sections of the IFT-RC400 User Guide are included in this section for reference.
NOTE: For additional information, refer to the IFT-RC400
Installation and Operating Instructions or visit www.fireplaces.
com/IFT-RC400demo to view the IFT-RC400 demo video.
Introduction
This user guide serves as a quick reference to the screen,
functions and indicators on your IntelliFire™ Touch
Remote control.
SCREEN
INDICATOR BAR
ROOM TEMPERATURE
FUNCTIONS
DYNAMIC ICONS
30
DISPLAY
SELECTION
INDEX
Outdoor Lifestyles • ODFORTG-36 Owner Manual • 4602-900 Rev. A • 12/16
FUNCTIONS
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Thermostat
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set tem-
perature (ST).
To achieve the most accurate thermostat function, locate
your IFT-RC400 remote control in the same general space
that you want to have temperature controlled by your ap-
pliance. For best results, keep your IFT-RC400 remote
away from direct radiant heat from the appliance, adja-
cent windows and doors, HVAC vents, and direct sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next, sim-
ply select your desired set temperature by using the ar-
row keys and press ON to confirm the setting. The actual
room temperature (RT), measured by your IFT-RC400
remote, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 3 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
the flame height based on the difference between the RT
and the ST. As the RT rises closer to the ST, the flame
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
desired flame height level. Your appliance will automati-
cally adjust flame height based on the difference between
the RT and ST.
Flame Height
You can set your desired flame height level to affect the
ambiance and control the heat output.
Your appliance will remember the previous flame height
setting and adjust the flame to that level 10 seconds after
start.
1