Table of Contents
Advertisement
REMARKS
-
Sections 4 to 8, 15 to 19, 21.4 and 25 tests were conducted at Anodyne Electronics
Manufacturing Corp. (AEM) in Kelowna BC.
-
Section 16.6.1 part (b) Requirement for Equipment with Digital Circuits and (d)
Double Interrupt Requirement for dc Equipment with Digital or Memory Devices were
tested.
-
Section 21.5 (radiated RF emissions) was not tested.
-
Section 26 is qualified by analysis to FAR 23.853. Acrylic faceplate material was
tested at Exova in Mississauga Ontario.
Rev: 1.00
ENG-FORM: 521-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
LSC22-001
End of Environmental Qualification Form
Jan 25, 2017
Environmental Qualification Form
Page 4 of 4
Advertisement
Table of Contents
