AEM LSC22 Installation And Operation Manual page 22

Conditions
Voltage Spike
Audio Frequency Conducted
Susceptibility
Induced Signal Susceptibility
Magnetic Fields Into Equipment
Electric Fields Into Equipment
Magnetic Fields Into Cables
Electric Fields Into Cables
Spikes Induced Into Cables
Radio Frequency Susceptibility
Radio Frequency Emission
Conducted RF Emission
Radiated RF Emission
Lightning Induced Transient
Susceptibility
Lightning Direct Effects
Icing
Electrostatic Discharge
Fire, Flammability
Rev: 1.00
ENG-FORM: 521-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
LSC22-001
Environmental Qualification Form
Section Description of Conducted Tests
17.0 Equipment tested to Category A
600 Vpp for 10 μs
Positive and negative spikes
18.0 Equipment tested to Category B
1.6 Vpp 0.2 to 1 kHz
4.0 Vpp 1 to 15 kHz
19.0 Equipment tested to Category ACE
19.3.1 20 Arms @ 400 Hz
19.3.2 170 Vrms @ 400 Hz
19.3.3 18 A•m @ 380 to 420 Hz
19.3.4 360 V•m from 380 to 420 Hz
19.3.5 Positive and negative spikes as per DO-160G
20.0 Category X, no test performed.
21.0 Equipment tested to Category M
21.4 Power lines: 150 kHz to 152 MHz
Interconnecting Cables: 150 kHz to 152 MHz
21.5 Category X, no test performed.
22.0 Category X, no test performed.
23.0 Category X, no test performed.
24.0 Category X, no test performed.
25.0 Equipment tested to Category A
15,000 Vp, 10 positive and negative spikes.
26.0 Compliant to FAR 23.853 by analysis.
(LSC22-001-652-0)
Jan 25, 2017 Page 3 of 4