Handling; Inserting The Shooting Nail; Inserting And Removing The Cartridge Strip - DeWalt DDF2120400 Translation Of The Original Instructions

4

Handling

WARNING
Serious injuries due to accidental
triggering
Î
Always keep the ¿ ngers away from
the trigger if the Powder Actuated
Tool is not facing the target material.

4.1 Inserting the shooting nail

NOTICE Do not force the shooting nail into the
barrel. If the shooting nail cannot be inserted
by hand, it may be damaged or be unsuitable
for the Powder Actuated Tool, see chapter 2.3
"Shooting nails" and chapter 6 "Technical data".
Î
Insert the shooting nail into the barrel.
Î
Pull the barrel all the way forward (1) in one
¿ rm motion and then pull it back to the stop
(2).
2
4.2 Inserting and removing the
Inserting the cartridge strip
Î
Removing the cartridge strip:
Î
1
cartridge strip
Insert the cartridge strip tab ¿ rst into the
underside of the grip until it sits À ush.
Grab the tab of the cartridge strip and pull
the strip out of the Powder Actuated Tool
from above.
English
37