Table of Contents
Advertisement
*Please make sure that your headset is fully charged before
using the Multi-Connection mode
Resetting your Bluetooth device
Turn the headset on, simultaneously press and hold down
the " -" and "+" button for 5 seconds or until you hear an
audible beep confirming the reset. This will clear all
settings/memory.
Troubleshooting
If you are unable to connect your headset and mobile phone,
please try the following:
•
Ensure that your headset is fully charged and powered on.
•
Ensure that the headset is paired with your mobile phone.
•
Ensure that your mobile phone's Bluetooth feature is
activated. Please refer to your mobile phone user's guide for
specific instructions.
•
Ensure that the headset is within a 10 meter (30 ft.) range
of your mobile phone and that there are no obstructions, such
as walls or other electronic devices, between the two.
•
If the above steps do not solve your problem, please
remove your mobile phone battery for a short time and
recharge the headset. Repeat the troubleshooting sequence.
Advertisement
Table of Contents
