PAIRING YOUR HEADSET
In order to use your Jarv Mach1 Bluetooth Stereo Earbuds
with a Bluetooth-enabled device, you will first need to pair
the two.
PAIRING WITH YOUR DEVICE
1
2
100%
PRESS & HOLD
8-9seconds
1. Begin with the headset being powered off and fully charged
2. Place the headset and the mobile phone where they are
easily viewable and no more than 3ft. apart.
3. Press and hold the Pairing button (multi-function button)
for approximately 8-9 seconds until the red and blue light