Table of Contents
Advertisement
Once you have made pair setting for your
phone and a Bluetooth device, the setting is
saved. When making pair setting for the
FOMA terminal and a Bluetooth device, you
may need to enter a pass code (PIN). Your
phone will automatically try the generic pass
code 0000. If this does not work, see the
documentation of your Bluetooth device for
the pass code used by your Bluetooth
device. You do not need to re-enter the pass
code the next time you connect to a paired
Bluetooth device already set.
You cannot make pair setting for the FOMA
terminal and two Bluetooth headsets.
However, you can set it with two or more
Bluetooth devices if the same profile is not in
use. The FOMA terminal supports the
following Bluetooth profiles: A2DP, AVRCP,
HFP, HSP, OPP, PBAP and SPP.
From the Home screen, tap t.
1
2
Tap [Settings]
networks]
3
Tap [Scan for devices].
･ A list of Bluetooth devices detected
appears.
4
Tap a Bluetooth device name to
pair with the FOMA terminal.
[Wireless &
[Bluetooth settings].
5
If necessary, enter the pass code
(PIN).
･ You can use a Bluetooth device that
has been paired. The pairing and
connection status appear below the
device name in the Bluetooth device
list.
･ Some Bluetooth devices make
connections continuously after
making pair setting.
❖
Information
･ Make sure that the Bluetooth function of the device
for making pair setting is ON, and that the
Bluetooth detection function is on.
･ When you make pair setting with the Bluetooth
device supporting Secure Simple Pairing (SSP)
function, a passkey appears on the screen. After
checking the appeared passkey is correct, the pair
setting is mode.
Connecting the FOMA terminal
with another Bluetooth device
From the Home screen, tap t.
1
2
Tap [Settings]
networks]
[Wireless &
[Bluetooth settings].
File management
Continued on next page
143
Advertisement
Table of Contents
