Rear Wheel Installation - Yamaha DT501988 Owner's Manual

1. Cotter pin
J-365K
Rear wheel installation
When installing the rear wheel, reverse the
removal procedure. Pay attention to the fol-
lowing points:
1. When connecting the chain, make cer-
tain the closed end of the master link clip
is facing the direction of rotation.
7-34
2. Adjust the drive chain.
3. Make sure the axle nut and tension bar
bolt are properly torqued, and a new
cotter pin is installed.
U-647
6WARNING:
Always use a new cotter pin on the axle
nut.