OSEE IRS3232 User Manual page 29

Step 1 Click DEST1 for selecting the target output channel, as shown in
Figure 6.2-7, the DEST1 button turns green.
Figure 6.2-7 Shortcut Button Settings
The default signal source for DEST1 is SRC1.
Step 2 Switch signal source
Click SRC10 button, as shown in Figure 6.2-8, the SRC10 button turns
green, thus the signal source of DEST1 is switched to SRC10.
Figure 6.2-8 Shortcut Button Settings
 Rename the button name: you can rename the button name of signal
source button and output destination button.
The name of button is composed of alphabets, numbers and underline,
and the length should not exceed 16 characters.
At first, right click the signal button, it will prompt a Button Names dialog
box, as shown in Figure 6.2-9:
Figure 6.2-9 Shortcut Button Settings
23
Network Control