Network Control
You can select StatusLanguage command to change the language
setting.
Either the router or the remote control panel can only access the network
control page of itself.
The default IP address of remote control panel is 192.168.1.7.
6.2 Network Control
Open the management interface as shown in Figure 6.2-1, and there are two
menu tabs:
STATUS
REMOTER
6.2.1 STATUS
It will introduce STATUS tab in this section.The STATUS tab is used to
show the default parameters of the IRS series, such as the basic
information of the device, the illustration of the panel information. Click
STATUS, it displays the parameters as shown in Figure 6.2-1, the details
are as follows:
Figure 6.2-1 System Page
18