Table of Contents
Advertisement
For a router, if the higher 4 bits are ON, it will restore the default IP, the
default value of IP address is 192.168.1.86.
When the remote control panel is cooperating with the router, the valid
range of the address of remote control panel is from 1 to 254.
REF
6.
It offers REF inputs to realize genlock to ensure the coincidence of signals
in time at a combining or switching point.
7.
INPUT*(1-N)
It is used to connect with the input source signals. The signal from
SRC*will be transmit to a pointed DEST*.
8.
OUTPUT*(1-N)
It is used to connect with the output destinations. Select an output channel
to send a signal.
13
Device Features
Advertisement
Table of Contents
