Care and Cleaning
Attaching and removing the upper panel
1.
Remove the front panel and pull out the air filter.
2.
Remove the upper panel.
1) Hold the 2 tabs on either side of the upper panel and pull forward to remove.
2) Remove the tab in the center and lift.
3.
Attach the upper panel.
• Insert the 3 tabs on back of the upper panel and then push it down.
• Push the upper panel down until it clicks.
Cleaning for each case
• Wipe it with a soft cloth soaked in water. (Only neutral detergent may be used.)
• In case of washing the front panel with water, dry it with cloth, dry it up in the shade after washing.
CAUTION
• When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
• When removing or attaching the front panel, support the front panel securely with hand to prevent it from falling.
• For cleaning, do not use hot water above 104°F (40°C), benzine, gasoline, thinner, nor other volatile oils, polishing compound, scrubbing brushes,
nor other hand stuff.
• After cleaning, make sure that the front panel is securely fixed.
• Wipe the front panel with a soft cloth. Wiping with a hard cloth may scratch it.
22
Tab (center)
Tabs (one on each side)
Tabs (3 locations)
Page 23