Bull DPS 7000 Operator's Manual page 722

GCOS 7 System Operator's Guide
PRINT
DPAN
REPORT
Example
1.
2.
3.
4.
N
OTE
The patches are not printed.
Resources required:
Note that DP_SAVE with PRINT=MM and DP_PRINT use at least 50 cylinders
(work file on WKMD).
B-22
Type of printing to be performed.
PRINT=MM is the quickest global printing command.
It gives a summary of all processes comprising:
−
−
−
− The PCB and STACK FRAMES of the processors.
PRINT=FW gives a summary of all processes
comprising:
−
− VMM information.
PRINT=CRASH prints an automatic summary
concerning the crash reason. The summary given
depends on the type of crash analyzed by DPAN.
Indicates if the input file is of DPAN type or not.
Default value: NO (for SYS.SYSDUMP file).
Is used to obtain the reporting of the job.
Default value: NO.
A crash occurs.
The dump is saved on the SYS.SYSDUMP file at ISL time.
To print the dump, enter:
EJR DP_PRINT LIB=SYS.HSLLIB VALUES= (INMD=UTOPIE
INDVC=MS/B10 PRINT=CRASH)
Then send the listing to the Service Center or use it for a first analysis of the
problem.
:
The SYSTEM BASE
The STATUS of all processes
The RETURN CODES of the processes
The TYPE 0 writeable segments
47 A2 53US Rev03