Display_Dynsave_Svr (Ddynsvr) - Bull DPS 7000 Operator's Manual

7.6.20

DISPLAY_DYNSAVE_SVR (DDYNSVR)

Purpose
This command displays information on the current state of the dynamic saves in
progress.
Syntax
{ DISPLAY_DYNSAVE_SVR }
{ DDYNSVR
Parameters
None.
Rules
This function is only available when the server is active.
If the server is inactive, the following message is displayed: "PLEASE RETRY
LATER (TERMINATE RUNNING OR NO SERVER)".
Example
DDYNSVR
BYA2: ddynsvr
PLUG
BYA2: ddynsvr
PLUG
PLUG
PLUG
PLUG
PLUG
BYA2:
47 A2 53US Rev03
Description of the Operator Commands (Part 1)
}
(Produces the display shown below:)
SERVER OF DYNAMIC SAVE
SERVER OF DYNAMIC SAVE
SAVE XRON
NUMBER OF FILES TO SAVE :
REMAINING FILES TO SAVE :
WORKFILE BLOCK-4K USED :
SAVE IN SAVE PHASE
: X2762
: X1616
: X1815
3
3
10
7-85