Execute_Directive (Exdir) - Bull DPS 7000 Operator's Manual

GCOS 7 System Operator's Guide
7.7.6

EXECUTE_DIRECTIVE (EXDIR)

Purpose
Executes the commands (in GCL format) that are given in the COMMAND
parameter. Main Operator commands may be submitted this way if the
ABSENTEE Job is running under a project that has the "MAIN" attribute. When it
is not the case, only IOF directives as described in the IOF Terminal User's
Reference Manual may be executed. The image of the submitted commands and
the error-messages (if any) is provided in the JOR.
Syntax
--------------------------------
{ EXECUTE_DIRECTIVE }
{ EXDIR
Parameters
COMMAND
Rules
•
The GCL directives 'MWINLIB BIN' and 'BYE' may not be executed via
EXDIR.
•
A job cannot suspend itself through HJ via EXDIR unless the ENDSTEP
parameter is used in the HJ command.
Example:
EXDIR 'MODIFY_LOAD MULTI=100 CLASS=P ; MDHW TWIN=0';
7-184
}
COMMAND = char255
the string of commands to be executed (commands are
separated by a semi-colon).
{set multiprogramming level for P class to 100 and
reinsert all available resources in the CSS}
47 A2 53US Rev03