Bull DPS 7000 Operator's Manual page 129

messages for printers
hh.mm dvnm PREMOUNTED volnm
If at least one sharable disk device is seized by the other system, the following
message is displayed:
DV34 GCOS: dvnm AVR IN PROGRESS: TRAFFIC WILL RESUME
The lists of resident and shared disks are processed. Possible error messages have
been described in section 3. When the DV43 question is asked, it must be answered
as explained below in Section 3.4.5.2 DV43 Question.
When no error is detected, resident and shared disks are allocated to X1 (system).
Likewise, BKST disks are allocated to X1, including the SYSTEM disk. In
addition, on DPS7000/An systems, the service disk is allocated to X1.
MIRROR disks are then processed, if any exist on the site (system configured with
MIRROR = YES). Pairs of mirrored copies are identified and checked;
resynchronization, automatic refilling or copy invalidation may take place at that
time. AVR messages are sent to the operator console:
messages for MIRROR disks
MR01 dvnm PREMOUNTED volnm MIRROR { PRIM [ RESYNCHRONIZED ] }
MR01 dvnm PREMOUNTED volnm MIRROR { WILL BE COPIED
Refer to the Mirror Disks User's Guide for further details.
47 A2 53US Rev03
Starting and Terminating a GCOS 7 Session
{ SEC [ RESYNCHRONIZED ]
{ ALONE
{ WILL BE REFILLED }
}
}
}
3-57