Bull DPS 7000 Operator's Manual page 287

SYSTEM
Rules
•
To connect a function to the domain CDP2 or CDP3, this domain must be free or
in other words, no other function must be connected to it.
•
No function can be connected to the domain STANDARD (corresponds to IPU
processors).
•
By default all functions are connected to CDP1.
•
A function can be connected to one and only one domain.
Examples
CNFUNC DOMAIN=CDP2 FUNCTION=OPEN7
CNFUNC DOMAIN=CDP3 FUNCTION=IQS
N
OTE
47 A2 53US Rev03
the system where the command will be executed.
When OPEN7 jobs start, they will use the CDP2 CPU
resources
When IQS jobs start, they will use the CDP3 CPU
resources.
:
The CONNECT_FUNCTION, DISCONNECT_FUNCTION and
DISPLAY_FUNCTION commands are part of the MAIN GCL domain.
Description of the Operator Commands (Part 1)
7-33