LAMI AUTO ATLAS-14T Instruction Manual page 7

Name of Each Part
Main body of Auto Atlas-14T
Laminate film set bracket
Laminate film is set here.
Cooling fan
Fan operates when roller temperature exceeds 82˚C.
Cover attachment
Top cover is attached.
Paper plate
Paper to be processed is set.
Change paper size (length)
Paper length can be changed by
sliding.
Change paper size (width)
Paper width can be changed by
sliding.
Handle is used to open and close top unit.
The laminated paper comes out of this
The laminated paper is transported
The handle is inserted here. It allows vertical
movement of the rollers.
Power switch, power cord
This is the inlet of power cord provided with
main power switch. [O]=off [I]=on
Handle
Processed
Transport roller
Handle
6