Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LAMI AUTO ATLAS-14T
Summary of Contents for LAMI AUTO ATLAS-14T
-
Page 2: Table Of Contents
Preface Thank you very much for purchasing our This Instruction Manual (booklet) includes details for safe use of this product. Please read this booklet thoroughly and correctly use the machine. Also, store this booklet properly for immediate use when necessary while using the product. Table of Contents Preface ■... - Page 3 Meaning of symbols This document classified and explains hazards and damages created when the displayed symbols are neglected and the product is used improperly, to prevent danger on customers or others and property damage in advance. When this sign is neglected and the product is handled improperly, Warning there is a concern for death or sever injury of human beings.
- Page 4 Warning Only use the power cord included in the product and do not use with power sources other than the displayed. Do not place heavy object on top of power cord, connect nearby a heating device, or connect multiple power cables to an outlet.
- Page 5 Appropriate places for installation Install this product in the following places. Horizontal and stable places Slanted or unstable use can have bad impact such as return of paper. Also, there is a concern for an unexpected accident. Places where exclusive power outlet can be secured. Do not use this product with power sources other than power with rated voltage regulated in this Manual.
-
Page 6: Main Body Of Auto Atlas-T14
Characteristics of Product Stable thermal performance Metal roller is positioned in front of heat rollers that perform laminate (compression) to preheat the film for stable thermal performance, allowing high quality laminate processing. Auto cutting function Edges of the laminated paper can be cut automatically. High speed laminate The metal roller described above is mounted to allow high speed laminate. - Page 7 Name of Each Part Main body of Auto Atlas-14T Laminate film set bracket Laminate film is set here. Cooling fan Fan operates when roller temperature exceeds 82˚C. Cover attachment Top cover is attached. Paper plate Paper to be processed is set.
-
Page 8: Interior Of Auto Atlas-T14
Interior of Auto Atlas-14T Metal roller Be careful as it gets hot during use. Heat roller Be careful as it gets hot during use. Pull roller The laminated paper is transported to the Bottom laminate film support descending This lever is used to descend or fix the support while setting bottom laminate film. - Page 9 Auto Atlas-14T Operation panel Ready Lamp (red) Number Display This lamp is turned on when laminate work Displays surface temperature of the roller can be performed with consideration on and setting values. roller surface temperature. In general (when no operation is done...
- Page 10 Auto Atlas-14T Basic operation of operation panel Basic operation of this product is done by combining [W/CUT] with other buttons. Descending of paper Elevation of paper plate plate Operation paper Operation of paper supply motor plate motor Operation main Reverse rotation of...
- Page 11 To make margin setting (front side of direction of film) Initial setting: 3mm Adjustable range: 0-50mm 1. Turn on the F margin LED and press [ENT] button. 2. Value on the display will flicker. (Showing that you entered setting mode) 3.
-
Page 12: Before Processing Laminate P
Before Laminate Processing About laminate film There are two types of laminate film, 「roll type」 and 「pack type」. This product uses 「roll type」 laminate film. ※ 「Pack type」 laminate film and 「cold film」 cannot be used. This is thickness of the laminate film. Use according to the purpose. Films Thickness (µ) micron used by this product are 50 μ... -
Page 13: About Papers Used
About papers used Refer to below for sizes and thicknesses of papers that can be used on this product. Vertical size of paper Horizontal size of paper Ex: coating paper Paper thickness (basis number of papers Paper Type Length Width Vertical Horizontal weight:... -
Page 14: Setting And Processing Of Laminate Film
Setting and Processing of Laminate Film Setting and Processing of Laminate Film Refer to the following to set the laminate film. ※ Since it is dangerous nearby during film setting, turn the power OFF and cool the rollers for 10 minutes before setting. -
Page 15: Heat Rollers
② Slowly pull down the left and right levers of the bottom laminate film stand underneath the paper plate down to the edge. Right spring paper tube holder ③ The film passes through the back of tension bar and comes out of outlet past the heat roller. Pull Roller Heat Roller Tension bar... -
Page 16: Other Rollers
Maintenance This product is composed of various rollers, and they must be cleaned with use. Laminate can be maintained as desirable by cleaning the rollers. Cleaning of roller Small amount of glue can leak out of the film section and attach to the roller during laminate processing. -
Page 17: Troubleshooting For Failures
Troubleshooting for Failures The following must be kept in mind while using this product Power does not turn on or machine does not function Insert outlet plug and check power switch Make sure that the outlet plug is correctly connected. Check whether power switch on the rear side is turned on. -
Page 18: Paper Is Not Supplied Or Stopped
Paper is not supplied or stopped You are trying to process a paper that does not satisfy the spec. If more than 30mm of papers is set on the paper plate, reduce the number of papers. Do not use papers with thickness outside the scope. Direction board is not set correctly. -
Page 19: Others P
Others Product Specification Max. laminating width A3 (305mm) Laminating speed 1.6m/min (Fixed) Processing temperature Max. 120˚C Roller composition Metal rollers, Heat rollers, Pull rollers (2 ea) Pressurizing method Spring, Cam method Power requirements AC 230V 50/60 Hz Power consumption 1150 W Size (W×D×H) 530 x 900 x 420 (mm) Weight...