2 Getting started
2.1.1
Clearing test data
If you want to clear the tests you just made without saving them, press the
to confirm the data deletion.
2.1.2
Viewing results
You can view results for tested patients:
Preview
•
Press
Already tested patients are indicated by a record number in parenthesis in the lower right corner of the display, e.g.
(16).
Example:
•
Use the
2.2
Preparing the patient
1. Instruct the patient in using the Patient Response Switch. See
2.3
Automatic Air Conduction testing
2.3.1
Automatic Threshold testing
The Automatic Threshold test presents tones to the patient at rising and falling levels in relation to the actual patient
response.
The test logic adheres to the modified (ascending) Hughson & Westlake method. See
(manual)
►
67
For symbols used, see
Start
2. Press
12
and scroll back and forth using the arrow buttons to select the patient record.
Left level
knob to scroll through test results.
for a description of the method.
1. Select Auto Threshold testing: Press
ted the test.
Symbols used
Setup
or
.
The patient responder
Auto Threshold
►
91.
Clear
button and choose
►
47.
Air Conduction threshold test
. The button lights to indicate that you have selec-
A. Auto Threshold test
B. Current frequency
C. Starting Hearing Level
D. Starting ear selected
Otometrics - MADSEN Xeta
Current
. You will have