Contents Contents Machine Overview General Safety Information Getting Started How To Use Looking After Your Machine — Filters Looking After Your Machine — Removing Blockages FAQs Other Information Guarantee...
Quick release cord wrap Wheels Brushbar reset button Stretch hose Telescopic extension tube 3-in-1 crevice tool, dusting brush and upholstery tool Post-motor filter Pre-motor filter NOTE: Some parts may vary according to model. Please check inside flap of box for more details. vax.co.uk...
Do not use this vacuum cleaner with a damaged cord or plug. If the supply cord is damaged return the vacuum cleaner to Vax or an authorised Service Agent for examination, repair or adjustment. Do not pull or carry this appliance by the cord. Do not use the cord as a handle, close a door on the cord or pull the cord around sharp edges or corners.
How To Use Using accessories NOTE: The 3-in-1 tool, TurboTool and other tools can be attached to the telescopic tube or directly to the hose. NOTE: Switch off the brushbar before using any accessories/hose/telescopic extension tube. Hose Remove hose. Attach tool to the hose Telescopic extension tube IMPORTANT: Hold unit when Remove telescopic...
Cleaning the pre-motor filter 24hr 40˚C 40˚C Turn the dirt container lid anti-clockwise to remove. Cleaning the HEPA post-motor filter Remove the post-motor filter from the body of the vacuum cleaner. vax.co.uk...
Looking After Your Machine – Removing Blockages IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. Re-setting the brushbar GREEN flashing light will To reset press the flashing light button in the middle of indicates no blockages in...
Clean the filters. Allow the unit to cool for approximately 1 hour (if you have cleaned the filters you will need to wait 24 hours for the filters to dry before putting them back in the machine) What do I do if the unit becomes damaged or broken? • We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk vax.co.uk...
Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
9:00am-17:00pm we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK vax.co.uk...