PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you begin cleaning
CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments
or removing and emptying the dirt container.
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens switch the vacuum cleaner off
and unplug from the electrical socket. Remove and empty the dirt container and also check the vacuum cleaner for
blockages. Allow the vacuum cleaner to cool for approximately 1 hour.
Filters require cleaning at least every 3 months. If the vacuum cleaner is blocked, switch off and unplug before removing
the blockage.
When the vacuum cleaner is stood in the upright position, or when using the hose and tools, the brushbar height adjuster
must be set to the highest setting.
Assembling your vacuum cleaner
Lift the handle up and
click into place.
Push the extension
tube onto the holder.
Line up the latch on the
accessory hose, push until
it clicks into place.
Place the dusting brush into
the dusting brush holder with
the brush facing outwards.
Getting started
Push the accessory hose into
the hose to machine connector.