Board configuration and programming
5.3. Focusing the lens with calibration program (only for Windows)
1º Load the code "Focusing the lens with calibration program" in Waspmote from 3G examples of Waspmote IDE
2º Connect the Waspmote 3G/GPRS board to your computer with the miniUSB connector. Then power on Waspmote.
Figure : USB connector on Waspmote 3G/GPRS board
3º Open the CameraDemo.exe and select SIM5218
Figure : Select SIM5218 in CameraDemo program
-20-
v4.3
Need help?
Do you have a question about the Waspmote and is the answer not in the manual?