Troubleshooting - POLTI VAPORETTO POCKET Instructions Manual

VAPORETTO POCKET - POCKET 2.0
PROBLEM
ON lamp (C) off
ON lamp (C) on but no steam
is delivered
The safety cap cannot be
unscrewed

TROUBLESHOOTING

Check that the plug is properly connected to the mains socket.
Ensure that the appliance has been turned on using the ON/OFF swit-
ch (B).
Wait for the Steam pressure indicator lamp (D) to turn on (approx. 5
minutes). If even once the lamp (D) is on, steam is still not delivered,
there is no water in the boiler. Fill according to the instructions given in
the manual.
Ensure the machine is off and disconnected from the power supply
and enable the steam control lever (4) on the steam sprayer (2) until
the steam flow ceases (paragraph "SAFETY CAP / SHORTAGE OF
WATER")
If the problem persists, unscrew the cap at the same time as applying
gentle pressure with fingers to the cap pin (see fig. D)
21
SOLUTION
Fig. D