System Configuration; System Information - i3 International Cortex S243 User Manual

System Configuration

This section describes the basic configuration tasks which includes the System Information and any switch management
including setting the Time, Account, IP, Syslog and NTP settings.

System Information

The system can be identified by configuring the contact information, name, and location of the switch.
To configure the system's contact information through the web interface:
• Click Configuration / System / Information
• Enter System Contact, System Name, System Location information on this form.
• Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
System Contact Information Configuration Parameters:
Items
System Contact
System Name
System Location
Description
The textual identification of the contact person for this managed node, together with
information on how to contact this person. The allowed string length is 0 to 128, and the
allowed content is the ASCII characters from 32 to 126.
An administratively assigned name for this managed node. By convention, this is the node's
fully-qualified domain name. A domain name is a text string drawn from the alphabet (A-
Za-z), digits (0-9), minus sign (-). No space characters are permitted as part of a name. The
first character must be an alpha character . And the first or last character must not be a minus
sign. The allowed string length is 0 to 128.
The physical location of this node (e.g., telephone closet, 3rd floor). The allowed string
length is 0 to 128, and the allowed content is the ASCII characters from 32 to 126.
18