Group Information; Ipv4 Sfm Information - i3 International Cortex S243 User Manual

Buttons

Group Information

This page will display the IGMP Snooping Group Information. The IGMP Group Table is sorted first by VLAN ID and then by
group. It will use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the
text "No more entries" is shown in the displayed table.
To display the MVR Statistics in the web interface:

Click Monitor / IPMC / IGMP Snooping / Group Information

Use the arrow buttons to move to the previous or next entry.

Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds.
IGMP Snooping Group Information Parameters:
Items
Navigating the IGMP Group Table
Each page shows up to 99 entries from the IGMP Group table, default being 20, selected through the "entries per page"
input field. When first visited, the web page will show the first 20 entries from the beginning of the IGMP Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the IGMP Group Table. Clicking
the button will update the displayed table starting from that or the closest next IGMP Group Table match. In addition, the
two input fields will - upon a button click - assume the value of the first displayed entry, allowing for continuous refresh
with the same start address. The form will use the last entry of the currently displayed table as a basis for the next lookup.
IGMP Group Table Columns
VLAN
Groups
Port Members
Buttons

IPV4 SFM Information

Entries in the IGMP SFM Information Table are displayed on this page. The IGMP SFM (Source-Filtered Multicast)
Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then
by group, and then by port. Different source addresses belonging to the same group are treated as a single entry.
To display the MVR Statistics in the web interface:

Click Monitor / IPMC / IGMP Snooping / IPv4 SFM Information.

Use the arrow buttons to move to the previous or next entry.

Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds.
Auto-refresh: Check this box to refresh the page automatically. It will do so every 3 seconds.
Refresh: Click to refresh the page.
Clear: Clears the counters for the selected port.
Description
VLAN ID of the group.
Group address of the group displayed.
Ports under this group.
Auto-refresh: Check this box to refresh the page automatically. It will do so every 3 seconds.
Refresh: Click to refresh the page.
<< Updates the system log entries to the first available entry ID.
>Updates the system log entry to the next available entry ID.
169