Mac Table - i3 International Cortex S243 User Manual

Port Status
Buttons

MAC Table

Entries in the MAC Table are shown on this page. The MAC Table contains up to 8192 entries, and is sorted first by VLAN ID,
then by MAC address.
To Display the MAC Address Table in the web interface:

Click Monitor / MAC Table

Specify the VLAN and MAC Address and the entries per page fields.

Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds
MAC Table Statistics Parameters:
Items
Navigating the MAC Table
Each page shows up to 99 entries from the MAC table, default being 20 selected from the 'entries per page' input field.
The page will show 20 entries from the beginning of the MAC Table. The first displayed will be the one with the lowest
VLAN ID and the lowest MAC address found in the MAC Table. The 'Start From MAC address' and 'VLAN' input fields allow
the user to select the starting point in the MAC Table. Clicking the 'Refresh' button will update the displayed table starting
from that or the closest next MAC Table match. In addition, the two input fields will assume the value of the first
displayed entry allowing for continuous refresh with the same start address. The > button will use the last entry of the
currently displayed VLAN/MAC address pairs as a basis for the next lookup. When the end is reached the text 'No more
entries' is shown in the displayed table.
Switch (Stack only)
Type
VLAN
MAC Address
Port Members
Port Status shows the port's status. The status can be one of the following values:

PoE not available. – No PoE chip found: PoE not supported for the port

PoE Turned OFF – PoE Disabled: PoE was disabled by the user

PoE Turned OFF – Power budget exceeded: The total requested or used power by the
PD exceeds the maximum power the Power Supply can deliver. Ports with the lowest
priority are powered down.

No PD detected – No PE detected for the port

PoE turned Off – PD overload: The PD has requested or used more power than the port
can deliver and has been powered down.

PoE turned OFF – PD is off.

Invalid PD – PD detected but is not working correctly.
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refresh: Click to manually refresh the page.
Description
The stack unit where the entry is learned.
Indicates whether the entry is a static or a dynamic entry.
The VLAN ID of the entry.
The MAC address of the entry.
The ports that are members of the entry.
180