Ipv6 Sfm Information - i3 International Cortex S243 User Manual

MLD Snooping Status Parameters:
Items
Nabigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per page"
input field. The default is 20 entries from the beginning of the MLD Group Table. The "Start from VLAN", and "group" input
fields allow the user to select the starting point in the MLD Group Table. Clicking the button will update the displayed table
starting from that or the closest next MLD Group Table match. In addition, the two input fields will - upon a button click -
assume the value of the first displayed entry, allowing for continuous refresh with the same start address. The form will
use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the text "No
more entries" is shown in the displayed table.
MLD Snooping Information Table Columns
VLAN ID
Groups
Port Members
Buttons

IPv6 SFM Information

Entries in the MLD SFM SSM Information Table are displayed on this page. The MLD SFM (Source-Filtered Multicast)
Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then
by group, and then by port. Different source addresses belonging to the same group are treated as a single entry.
To display the MLDv2 IPv6 SSM Information in the web interface:

Click Monitor / IPMC / MLD Snooping / IPv6 SFM Information.

Use the arrow buttons to move to the previous or next entry.

Check the Auto-Refresh check box to have the page automatically refresh every 3 seconds.
MLD SFM Information Parameters:
Items
Nabigating the MLD SFM Information Table
Each page shows up to 99 entries from the MLD SFM Information table, default being 20, selected through the "entries
per page" input field. When first visited, the web page will show the first 20 entries from the beginning of the MLD SFM
Information Table. The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD
SFM Information Table. Clicking the button will update the displayed table starting from that or the closest next MLD
SFM Information Table match. In addition, the two input fields will - upon a button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address. The will use the last entry of the currently
displayed table as a basis for the next lookup. When the end is reached the text "No more entries" is shown in the
displayed table. Use the button to start over.
MLD SFM Information Table Columns
VLAN ID
Group
Description
VLAND ID of the group.
Group address of the group displayed.
Ports under this group.
Auto-refresh: Check this box to refresh the page automatically. It will do so every 3 seconds.
Refresh: Click to refresh the page.
<< Updates the system log entries to the first available entry ID.
>Updates the system log entry to the next available entry ID.
Description
VLAN ID of the group.
Group address of the group displayed.
172