Qos Port Dscp - i3 International Cortex S243 User Manual

QoS Port DSCP

This section will describe how to set the QoS Port DSCP configuration that facilitates configuration of the basic QoS Port
DSCP settings for all the switch ports. These settings relate to the currently selected stack unit as reflected by the page
header.
To configure the QoS Port DSCP in the web interface:

Click Configuration / QoS / Port DSCP

Enable or disable the Ingress Translate and scroll to select the Classify Parameter configuration.

Scroll to select Egress Rewrite parameters.

Click Apply and click the Save icon in the upper right corner to save the settings or click Reset to cancel. The
Form will return to the previously saved settings.
QoS Port DSCP Configuration Parameters:
Items
Port
Ingress
Egress
Description
The Port column shows the list of ports for which you can configure DSCP ingress and
egress settings.
Change ingress translation and classification settings for individual ports. There are two
configuration parameters available in Ingress.
Translate: To enable the Ingress Translation click the checkbox.
Classify: Classification for a port includes 4 different values:
Disable: No Ingress DSCP Classification.
DSCP =0 Classify if incoming (or translated if enabled) DSCP is 0.
Selected: Classify only selected DSCP for which classification is enabled as specified in DSCP
translation window for the specific DSCP.
All: Classify all DSCP.
Port Egress rewriting can be one of the below parameters:
Disable: No Egress rewrite.
Enable: Rewrite enable without being remapped.
Remap: DSCP from analyzer is remapped and frame is remarked with remapped DSCP value.
117