Planet DH-1600 User Manual page 15

sections, you are ready to plug the hub in and turn it on.
The input voltage is from 90 to 260 volts AC and any frequency
from 50 to 60 hertz. Adjustment to the power source is
automatic; there is no switch to set.
Before plugging the hub in, make sure the power cord
(1) is long enough to reach an AC wall outlet of an approved
type,
(2) has plugs that match both the hub's power inlet and the type
of wall outlet you will use, and
(3) Conforms to safety regulations in your area.
In most parts of the world you must use a three-conductor power
cord with an integral three-prong grounding plug.
If the supplied power cord does not meet all three requirements
given above, contact your computer equipment dealer and obtain
one that does. Do not use an extension cord or multi-socket
adapter; do not attempt to use a cord designed for any other kind
of power inlet or wall outlet; do not use a cord that fails to meet
safety standards in your part of the world.
DH-1600/DH-2400 User's Manual
15