Table of Contents
Advertisement
2. Ensure that the Wireless Radio Receiver is turned off, and then press and hold the
ON/OFF button on the Wireless Radio Receiver for seven seconds or more.
The Wireless Radio Receiver will turn on and the LINK lamp will flash in green.
3. When pairing is finished, the LINK lamp on the Wireless Radio Receiver will light up in
green.
The screen of the product will display the number of Wireless Radio Receivers that
have just been paired.
If you want to pair this product with two or more Wireless Radio Receivers, repeat
steps 2 through 3 for each Wireless Radio Receiver.
4. Press the center button.
Pairing will end and the LINK lamp on the product will light up in green.
If the LINK lamp on the product or the Wireless Radio Receiver lights up in red after the
pairing procedure, the products have not been paired successfully. Retry the procedure
Advertisement
Table of Contents
