Flash Mode - Sony FA-WRC1M Manual

Wireless radio commander
Hide thumbs Also See for FA-WRC1M:
Table of Contents

Advertisement

Items that can be changed

Flash mode

You can set the flash mode for each group.
The flash modes for groups A, B, and C can be set to [TTL] or [MANUAL]. The flash modes
for groups D and E are locked to [MANUAL].
Set the flash mode to [OFF] if you do not want the flashes in the group to be used.
Flash compensation (only for groups set to [TTL] mode)
Flash level (only for groups set to [MANUAL] mode)
[11] Shooting
Remote release shooting
You can perform remote release shooting using this product by connecting it to a paired
Wireless Radio Receiver (sold separately) and a camera.
1. Connect the Multi/Micro USB Terminals of the Wireless Radio Receiver and the camera
using a Multi Terminal Connecting Cable (sold separately).
2. Press the Fn button on the product.
3. Set the cursor on the shooting mode (A) using the top/bottom/right/left button on the
control wheel, and then select [RELEASE] by turning the wheel.
4. Press the SHUTTER button to shoot.
If the Multi/Micro USB Terminals of the product and the camera are connected using
a Multi Terminal Connecting Cable, the connected camera will also perform
shooting.

Advertisement

Table of Contents
loading

Table of Contents