Useful Functions In Combination With Hvr-Z7/S270 - Sony HVR-MRC1 Service Manual

Memory recording unit
Hide thumbs Also See for HVR-MRC1:
Table of Contents

Advertisement

Useful functions in combination
with HVR-Z7/S270
Tapeless external REC control
Even if there is no tape in the HVR-Z7/S270, you can start or
stop recording the image on this unit.
Set the EXT REC CTRL setting of the HVR-Z7/S270 as
follows.
• REC CTRL MODE ..... EXT ONLY
You can start or stop recording the image on a
CompactFlash in this unit with START/STOP button only.
(If there is a tape in the HVR-Z7/S270, you can start
recording video data with REC button of the video camera
operation part, stop recording video data with STOP button
of the video camera operation part on the tape.)
Tips
If there is no tape in the SYNCHRONUS or RELAY settings,
you can start or stop recording the image on a CompactFlash
in this unit.
• STBY COMMAND ..... Desired setting
* For details, refer to the operating instructions for the
external REC control of the HVR-Z7/S270.
Set this unit as follows.
• CAM LINK SEL .......... SYNCHRO
• Press the CAM LINK button to set to CAM LINK [ON].
You can record the time code of the HVR-Z7/S270 without a
tape in the HVR-Z7/S270.
If you want to record video using the time code of
the HVR-Z7/S270, set the time code setting of the
HVR-Z7/S270 as follows.
Time code value always advances.
• TC MAKE ........ PRESET
• TC RUN ........... FREE RUN
Time code value only advances during recording.
• TC MAKE ........ PRESET
• TC RUN ........... REC RUN
In combination with the time code settings of the HVR-Z7/
S270, this unit operates as follows.
Time code of this
TC MAKE
TC RUN
unit with a tape in
the HVR-Z7/S270
When starting
recording on a tape,
video is recorded
using the time code
REGENERATE
of the tape base.
If the time code of
the tape base cannot
be read, the time
code starts from
00:00:00:01.
When starting
recording on a tape
or CompactFlash in
this unit, the time
REC RUN
code value advances
from the preset time
PRESET
code of the HVR-
Z7/S270.
The preset time code
value advances
FREE RUN
constantly and data
is recorded using the
data code.
• If you want to use REC RUN with a tape in the HVR-Z7/
S270, set REC CTL MODE of the HVR-Z7/S270 to
[SYNCHRONOUS] and set CAM LINK SEL of this unit to
[SYNCHRO].
Time code of this
unit without a tape
in the HVR-Z7/S270
The internal time
code of this unit
runs automatically.
When starting
recording on
CompactFlash in
this unit, the time
code value
advances from the
preset time code of
the HVR-Z7/S270.
The preset time
code value
advances constantly
and data is recorded
using the data code.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents