Advertisement
POWER WAVE E500
PRODUCT DESCRIPTION
The Power Wave E500 is a robust power source with feeder
control intended for basic CV and CV-Pulse robotic welding appli-
cations. The 40-500 amp current range will support a wide variety
of welding situations. The interface to the wire feeder and robotic
controller are both conveniently located on the front of
Power Wave E500. The wire feeder control interfaces to the wire
feeder through a 14-pin MS-style connector. The interface to the
robot controller is over ArcLink XT, through a shielded RJ-45
connector.
The case of the Power Wave E500 has two lifting handles
located on the front and rear of the case. The Power Wave E500
has an IP23 rating that allows the machine to operate reliably in
harsh industrial environments.
EqUIPmENT LImITaTIONS
The Power Wave E500 is only compatible with the Lincoln
Electric wire feeders listed in the compatible equipment section. It
does not support any semi-automatic welding. The Power Wave
E500 is also compatible only with robotic controllers that support
ArcLink XT.
DESIGN FEaTURES
• Compact, Durable Case – Tough IP23 enclosure rating
ensures the ability to withstand extreme field environments.
WELDING PROCESSES
Output Range
Process
GMAW
GMAW-Pulse
FCAW-G
OPERATING TEMPERATURE RANGE
-10° C to + 55° C.
Output is de-rated for temperatures in excess of 40° C.
OUTPUT RATINGS AT 40° C
Amps
Duty Cycle
450
100%
500
60%
OUTPUT RATINGS AT 55° C ELEVATED TEMPERATURES
Amps
Duty Cycle
375
100%
400
60%
COMPATIBLE WIRE FEEDERS
AutoDrive 4R220
AutoDrive 4R100
Power Feed 10R
3
DESCRIPTION
OCV (Uo)
(Amperes)
40-500 A
Peak 58 V
Volts
Temperature
36.5V
40° C
39V
Volts
Temperature
35V
55° C
36V
Advertisement
