Channel Scanning; Vox Function; Dual Watch Mode - Audiovox FR-530 Owner's Manual

Channel Scanning

Channel Scanning Channel Scanning Channel Scanning Channel Scanning
Press function button three times until the SCAN icon flashes. Press
the Up or Down button to enable the Scan function (the icon will
appear steadily on the display). While in Scan mode, the unit will
pause on any active channel for 5 seconds, and then proceed to the
next higher channel. The unit will scan channels 1–14 for activity.
Scanning will continue until the PTT (2), Function (12) or Up/Down
buttons are pressed.
NOTE: NOTE: NOTE: NOTE: NOTE: When in SCAN mode, the transceiver cannot be turned off;
exit the SCAN mode first.

VOX Function

VOX Function VOX Function
VOX Function VOX Function
This feature enables you to have hands-free conversation. When
using the external microphone or headset, your voice or the signal is
detected and radio transmits and receives automatically.
To access VOX function, press function button 4 times until VOX
icon flashes. Press UP or DOWN button to enable VOX function
(icon will appear steadily).
Dual W

Dual Watch Mode

Dual W atch Mode atch Mode atch Mode
Dual W Dual W atch Mode
This feature allows monitoring of two channels simultaneously. P r e s s
function button repeatedly until "0" appears in the channel number
display and the Antenna icon
buttons, choose the alternate channel number you wish to
m o n i t o r f o r a c t i v i t y. Press the function button to enter your selection.
The channel display will now flash showing your current channel
and alternate channel selection. To disable Dual Watch mode,
an d C al l i co n f l a s h . U s i n g t h e
- 11 -
128-5774A 128-5774A 128-5774A 128-5774A 128-5774A
11 of 32 11 of 32 11 of 32
11 of 32 11 of 32