Page 1
Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual Model FR-114-2 Model FR-114-2 Model FR-114-2 Model FR-114-2 Model FR-114-2 T T T T T w w w w w o W o Wa a a a a y F...
Page 2
CONGRATULATIONS ON YOUR SELECTION OF THE FR-114-2 (FAMILY RADIO) It is one of the most sophisticated and reliable two way family radios available. BEFORE OPERATING YOUR FR-114-2 (FAMILY RADIO) READ THIS MANUAL CAREFULLY...
Page 3
The FR-114-2 is ideal for use around the house, in your car or boat, on hunting and camping trips, on the ski slopes or at the mall. You can also use the FR-114-2 Family Radio for business for security patrols or warehouse communications.
PERFORMANCE Your transceiver will achieve its maximum operating range when communicating with other transciever(s) in a flat open area with no trees or buildings obstructing its signal. Range may be up to two miles under such conditions. Obstacles such as buildings, trees or mountains will tend to reduce the transceiver’s effective range.
Page 6
Belt Clip Battery Compartment POWER ON /OFF-VOLUME CONTROL: Rotate clockwise to turn on the transceiver and increase the listening volume level. Push-to-Talk Button (PTT): Press to transmit. Release to receive. Speaker Microphone Monitor Button (M): Press and hold to monitor channel activity. 8-1.
Page 7
LED DISPLAY AND OPERATION The FR-114-2 is equipped with an LED display to indicate its settings and functions. Pressing the Push-to-Talk (PTT), monitor, channel select or call buttons, will illuminate the display. The display will remain lit for 5 seconds after any of these buttons is pressed.
Incorrect battery installation can damage the unit. BATTERY SAVER MODE Your FR-114-2 has a unique circuit designed to dramatically extend the life of its batteries. After five seconds of inactivity, the FR-114-2 will switch to battery saver mode and the display will turn off to conserve battery life. While in battery saver mode, the transceiver will remain ready to receive any incoming transmissions.
Page 9
USING YOUR FR-114-2 Turning the Transceiver on Rotate the POWER ON /OFF-VOLUME CONTROL clockwise to turn on the transceiver and increase the listening volume level. The speaker will play a confirmation beep tone to confirm the transceiver’s activation. To turn the unit off, rotate the POWER ON /OFF-VOLUME CONTROL counterclockwise.
Page 10
Call Signals When the call button is pressed, the FR-114-2 will transmit a three- second ringing sound to other transceiver’s tuned to the same channel. This feature can be used to signal other parties that voice communication is desired.
Page 11
To Transmit 1. Turn the POWER ON /OFF-VOLUME CONTROL clockwise to the on position. 2. If the battery low (BATT. LOW) indicator is on, replace the batteries. 3. Select the desired channel. 4. Press and hold the Push-to-Talk Button (PTT) button while speaking slowly and clearly in a normal voice, approximately 2 to 3 inches from the microphone.
Page 12
WARNING n Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of battery acid leaking from the batteries and corroding the transceiver. n Avoid exposing the transceiver to water or extremes of tempera- ture.
90 DAY LIMITED WARRANTY Applies to Audiovox Family Radio Service Products. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship...
Need help?
Do you have a question about the FR-114-2 and is the answer not in the manual?
Questions and answers