Table of Contents
Advertisement
Disassembly and Reassembly > VCR Deck Mechanism Disassembly
(16) Lever Up/Down Ass'y, Gear Center Ass'y Removal
1) Release the 2 hooks in the direction of the arrows as shown Fig. 4-4-19 and lift the Lever Up/
Down Ass'y.
2) Lift the Gear Center Ass'y.
Assembly :
1) Insert the Lever Up/Down Ass'y into the rectangular hole in Main Base as shown in Fig 4-4-20.
2) Lift the Lever Up/Down Ass'y approximately 35°. (Refer to Fig 4-4-20)
3) Insert the Ring of Gear Center Ass'y into the Guide of Lever Up/Down Ass'y.
4) Insert the Gear Center Ass'y into the post on Main Base.
5) Push down the Lever Up/Down Ass'y to lock of the Hook.
Note :
Be sure to confirm that Ring of Gear Center Ass'y is between the Guides of Lever Up/Down Ass'y
after finishing assembly of Lever Up/Down Ass'y and Gear Center Ass'y.
Fig. 4-4-19 Lever Up/Down Ass'y Removal
1) LEVER UP/DOWN ASS`Y
2) GEAR CENTER ASS`Y
4 - 16
GEAR CENTER ASS'Y
GUIDE
RING
GEAR
POST
HOOK
Fig. 4-4-20 Lever Up/Down Ass'y Removal
LEVER UP/DOWN ASS'Y
35
MAIN BASE
Advertisement
Table of Contents
