Table of Contents
Advertisement
4
Disassembly and Reassembly
4-1 Order of Disassembly
Refer to the Disassembly Flowchart in Fig. 4-1-1 for the order of removing components. When
reassembling components, use the reverse order to removal unless otherwise specified.
Reading Disassembly Flowchart:
After locating the target component in the flowchart, remove all components of the target in
sequence, following the arrows (routes) from the top of flowchart. If multiple routes exist to the
target component from the top of flowchart, remove all the components on all the routes.
Parts to remove
Top cover
Front panel
DVD Multi drive
DVD Main P.C.B
Jack P.C.B
4-2 Cabinet Disassembly
Information:
Numbers in figures are step numbers in disassembly procedure, and letters in brackets [ ] show the
types of screw.
(1) Top Cover
1) Remove the 7 screws [A].
2) Slightly open both ends on the front side of top cover and lift the top cover in the direction of the
arrow.
1) Screw [A]
Item
Parts to remove
Rear panel
4-2 (1)
FAN motor
Deck mechanism
4-2 (2)
VCR Main P.C.B
Front P.C.B
4-2 (4)
4-2 (5)
4-2 (5)
Fig. 4-1-1 Disassembly Flowchart
[A] M3X10(Silver)
Top Cover
1) Screw [A]
Fig. 4-2-1 Top cover
Item
4-2 (3)
4-2 (3)
4-2 (7)
4-2 (8)
4-2 (6)
2)
1) Screw [A]
4 - 1
Parts to remove
Item
Key P.C.B
4-2 (8)
2)
Advertisement
Table of Contents
