Disassembly and Reassembly > VCR Deck Mechanism Disassembly
(10) Lever Pinch Drive, Lever Tension Drive Removal
1) Remove the Lever Pinch Drive and Lever Tension Drive.
Fig. 4-4-13 Lever Pinch Drive, Lever Tension Drive Removal
(11) Lever Tension Ass'y, Band Brake Ass'y Removal
1) Remove the Lever Brake S Ass'y
2) Remove the Spring Tension Lever.
3) Rotate the stopper of Main Base in the direction of arrow "A".
4) Lift the Lever Tension Ass'y and Band Brake Ass'y.
Note :
1) When replacing the Lever Tension Ass'y, be sure to apply Grease on the post.
2) Take care not to touch stain on the felt side, and not to be folder and broken Band brake Ass'y.
3) After Lever Tension Ass'y seated, Rotate stopper of Main Base to the Mark[B].
2) SPRING TENSION LEVER
3) STOPPER
Fig. 4-4-14 Lever Tension Ass'y, Band Brake Ass'y Removal
LEVER PINCH DRIVE
(Refer to Fig
"A"
MARK[B]
4 - 13
LEVER TENSION DRIVE
4-4-15).
4) BAND BRAKE ASS`Y
4) LEVER TENSION ASS`Y