Ryobi RLT254CSEON Original Instructions Manual page 3

Press the primer bulb 10 times.
Squeeze the throttle lock and throttle trigger to run.
Wait 10 seconds.
Pull: Quick release tab
Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements.
75 dB
Sound pressure level at idle
Guaranteed sound power level
115 dB
When fitting the line spool to the cutting means, this symbol should be visible to the operator.
Pull the starter grip.
To reduce the risk of injury or damage, avoid contact with any hot surface.
Starting a warm engine by electrical starter
Starting a cold engine by electrical starter
Starting a warm engine by hand
Starting a cold engine by hand
The following signal words and meanings are intended to explain the levels of risk associated with the product.
SYMBOLS
DANGER
WARNING
CAUTION
CAUTION
English (Original Instructions)
SIGNAL
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
MEANING
3