Philips Hudson2 200P3 Service Manual page 80

76
Hudson2 200P3
Go to cover page
Step 3: Initiate Firmware of CPU for normal display.
Discnnect the Mains cord on monitor, then reconnect the Mains
cord to monitor again.
2. PLUG IN----------->
1. UNPLUG----------->
Fig. 17
Step 4: Check the updated Firmware version.
Access Factory Mode
Fig. 18
Factory Mode:
How to Get into Factory Mode Menu
Turn on LCD monitor.
Push AUTO " " & Left-VOLUME"
simultaneously 3 seconds around.
Bring up Factory mode indication as shown in Fig 19.
Check Firmware version : example as below.
CODE VERSION. 2.02
CONFIG VERSION. 2.02
OSD VERSION. 2.02
Factory Mode
indication===========>
Fig. 19
Firmware upgrade for CPU (Continued)
AUTO VOLUME
" buttons
2002-08-07
2002-08-07
2002-08-07
Factory Mode
CODE VERSION. 2.02 2002-08-07
CONFIG VERSION. 2.02 2002-08-07
OSD VERSION. 2.02
ORIGINAL PANEL COLOR
9300K For CAD/CAM
6500K FOR IMAGE MANAGEMENT
AUTO COLOR ADJUST
EXIT MAIN CONTROLS
TO PROCESS ADJUSTING
OK
2002-08-07