Removing The Monitor Base; Accessory Pack; Rear View - Philips Hudson2 200P3 Service Manual

6
Hudson2 200P3
Go to cover page
Front View Product Description
To switch monitor's power On and Off
Power LED
To access OSD menu
To adjust the OSD
To adjust brightness of the display
To adjust the OSD
To adjust speakers volume
Automatically adjust the horizontal position, vertical pos ition,
phase and clock setting
To mute the audio sound
MUTE LED
Video input LED, lit when CVBS or S
Signal inputs sel ection
PC input LED, lit when VGA or DVI activated
Activated PIP ( Picture in Picture) window

Rear View

1 CVBS video input
2 S-Video video input
3 VGA input
4 DVI-I input
5 AC power in
6 Mic out
7 Audio in
8 Audio L input
9 Audio R input
Front Control , Base

Removing the monitor base

The monitor surface is susceptible to scratching!
Lay the monitor on its face on a soft surface.
Remove the four screws on the rear of the monitor.

Accessory Pack

Unpack all the parts.
- Video activated
3138 128 74931
3138 188 75051(BLK)
3138 188 75031(white)
PC audio cable (lime)
3138 188 74551(BLK)
3138 188 74541(white)
3138 188 72251(BLK)
3138 188 72241(white)
3138 188 72261(BLK)
3138 188 72051(white)
Power cord
S-video cable
3138 188 74531(BLK)
3138 188 74521(white)
DVI to D-Sub
signal cable
3138 117 04281
EDFU pack
VGA signal cable
3138 188 75061(BLK)
3138 188 75041)white)
Mic cable (pink)
2422 033 00265
Mac adaptor
(optional)
AV cable
(white/red/yellow)