Matrix Vision mvBlueFOX3 Technical Manual page 136

13.15 Sequencer Control
SequencerTriggerSource
MATRIX VISION GmbH
sequencerTriggerSource Specifies the internal signal or
physical input line to use as the
sequencer trigger source.
supported by MATRIX VISION
devices are:
• Off: Disables the sequencer
trigger.
• ExposureEnd: Starts with
the reception of the Expo-
sure End.
• Counter1End: Starts with
the reception of the Counter
1 End.
Other possible values that might
be supported by third party devices
are:
• AcquisitionTrigger:
with the reception of the
Acquisition Trigger.
• AcquisitionTriggerMissed:
Starts with the reception
of the missed Acquisition
Trigger.
• AcquisitionStart: Starts with
the reception of the Acquisi-
tion Start.
• AcquisitionEnd: Starts with
the reception of the Acquisi-
tion End.
• FrameTrigger: Starts with
the reception of the Frame
Start Trigger.
• FrameTriggerMissed: Starts
with the reception of the
missed Frame Trigger.
• FrameStart: Starts with the
reception of the Frame Start.
• FrameEnd: Starts with the
reception of the Frame End.
• FrameBurstStart: Starts with
the reception of the Frame
125
Value
Starts