Troubleshooting - Epson PowerLite 670 Quick Setup

5
If your network assigns addresses automatically, turn on the DHCP
setting. If not, make sure DHCP is off and enter the projector's IP
Address, Subnet Mask, and Gateway Address, as needed. Then
press Esc.
6
When you are finished, select Complete and press
again to save your settings.
7
Press the Menu button to exit the menu system.
Install the EasyMP Multi PC Projection software on each computer that will
®
project over the network. Use the CD labeled EPSON Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online EasyMP Multi PC Projection Operation
Guide (requires an Internet connection). If you don't see the EasyMP Multi PC
Projection Guide icon, you can install it from the projector CD or go to your
product's support page (see "Where to get help").
To monitor and control your projector over the network, download and
install the EasyMP Monitor software (Windows only) and manual. You can
install a link to the downloads page from the projector CD or go to your
product's support page (see "Where to get help").
Project over a network
If you need to configure the projector for a wired network, see "Wired
network configuration" on the front of this sheet.
1
Press the LAN button on the remote control. You see this screen.
2
Start EasyMP ® Multi PC Projection on your computer.
Windows 10/8.x: Navigate to the Apps screen or All apps menu and
select EasyMP Multi PC Projection Ver. 2.10.
Other versions of Windows: Select
Programs > EPSON Projector > EasyMP Multi PC Projection.
OS X: Double-click the EasyMP Network Projection icon in the
Applications folder.
3
Select Advanced Connection Mode and click OK.
4
Select the projector you want to connect to, then click Connect.
If you don't see the projector you want, click the Automatic search
button to find the projector automatically, or click the Manual search
button to enter the projector's IP address.
5
If you see a message asking for a keyword, enter the four digits that
appear on the LAN standby screen and click OK.
Your computer image is projected, with a floating toolbar:
When you're done presenting, click Disconnect All on the toolbar.
, then press
or Start > Programs or All
Mobile device
To project from an iOS or Android™ device,
download and install the Epson iProjection™ app.
Visit www.epson.com/projectorapp (U.S.) or
www.epson.ca/projectorapp (Canada) for
more information.
Using web remote
You can use a standard web browser to control the projector through the
network. A "virtual remote control" on your computer screen lets you perform
many of the same functions as you can with the physical remote control.
1
Open your web browser and enter the IP address of the projector you
want to monitor in the browser window.
If you're not sure what the IP address of the projector is, turn the
projector on and select Net. Info. - Wired LAN or Net. Info. - Wireless
LAN from the Network menu to display the IP address of the projector.
(Do not enter the leading zeroes.)
2
Enter EPSONWEB as the default user name and admin as the default
password, then click OK.
3
From the Projector Control menu, select Web Remote. Use the on-screen
buttons to operate the projector, as you would using the remote control.
Select video signal
Select computer signal
Turn off picture
and sound

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing.
•
Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•
Press the Home button on the projector or remote control to verify the
source input and settings.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
check box.
•
If you're using a Windows computer, press the Windows key and P on
your keyboard, then select Duplicate.
Select equipment connected to
the USB port
Select wired or wireless
network signal
Pause video
Display closed
captions
. You may have to hold down the