Getting Started; Inserting Sim Card; Charging - Siemens XELIBRI 2 User Manual

Table of Contents

Advertisement

Inserting SIM card

Your network provides you with a SIM card.
If it is delivered credit card size, snap out the smaller
segment and remove any rough edges.
1. Depress side catch to ease open the cover (best with
thumb nail). Repeat for other side, slide cover
towards base and remove it.
2. Insert SIM card, ensuring cut off corner is correctly
positioned, sliding it under metal guide to position
shown.
3. Insert battery, ensuring tabs on left are engaged
A
(slots marked
remove battery later, move catch outwards whilst lift-
ing right side.
4. Replace cover, engaging bottom end before clicking
closed.

Charging

When delivered, your battery will not be fully charged.
Allow 2-3 hours for a full charge.
Insert the charger in an easily accessible AC power
socket, it can only be switched off by unplugging it.
Remove the charger cover, plug into the base of phone
with the metal plate to the rear.
While it charges, you'll see this symbol: h
If you don't see the symbol, see What if...? on p 23.

Getting Started

) before clicking in place. To
3

Advertisement

Table of Contents
loading

Table of Contents