Features And Settings; Key Lock; Ring Tones; Using The Alarm Clock - Siemens XELIBRI 2 User Manual

Features and Settings

Key lock

Prevent accidental calls by locking the keypad.
In standby, hold down the # key to lock.
From the Keys menu, choose Auto key lock to have
your phone automatically lock the keypad when it is idle.
With the key lock on, you can still answer calls and if
necessary dial the emergency services.

Ring tones

To switch off ring tones
In standby, hold down the * key.
Ring tones will be switched off until you hold down the *
key to switch them back on.
Switching off ring tones won't affect the vibrating alarm
(p 20) or alarm clock (below).
To change ring tones
You can use different ring tones for callers you recognise
and for messages.
From the Audio menu, choose Ringer melodies.
Choose the type of call you want to modify:
• General calls – new or unknown numbers
• Phonebook callers – numbers that appear in your
Phonebook
• Message group callers – calls from members of
your message group (p 13).
16
Click to choose the melody and choose Select.
You can also save ringer melodies from EMS messages
(p 15). You can purchase ringer melodies (delivered via
EMS) from a wide variety of sources.
Modify ringer volume using the Audio menu (p 20).

Using the alarm clock

Your phone provides a daily alarm that works even with
the phone switched off.
To set the alarm
From the Clock menu, choose Alarm clock.
Choose Change and either:
• confirm the time (if shown) by clicking
• enter the time (24 hour clock) at which you want to be
alerted. Click to delete a digit. Choose OK to set
the alarm.
To switch off the alarm, choose Change again.
When the alarm's set, you'll see y next to the time.
When you hear the alarm...
Click to cancel. The alarm will sound at the same time
tomorrow unless you switch it off (above).
Switching off ring tones won't affect the alarm.
, or